210:
162:
154:
122:
25:
185:
switched from on to off: while the charge is present, the transistor is on; all the charge must be removed before the transistor will turn off. Removing the charge takes time (called storage time), so the result of saturation is a delay between the applied turn-off input at the base and the voltage swing at the collector. Storage time accounts for a significant portion of the
222:
higher than the base voltage, and the
Schottky diode will be reverse-biased. If the input current is increased, then the collector voltage falls below the base voltage, and the Schottky diode starts to conduct and shunt some of the base drive current into the collector. The transistor is designed so that its collector saturation voltage (
260:
the same die, it had a compact layout, it had no minority-carrier charge storage, and it was faster than a conventional junction diode. His patent also showed how the
Schottky transistor could be used in DTL circuits and improve the switching speed of saturated logic designs, such as the Schottky-TTL, at a low cost.
346:
259:
filed a patent for the
Schottky transistor. In his patent the Schottky diode prevented the transistor from saturating by minimizing the forward bias on the collector–base transistor junction, thus reducing the minority-carrier injection to a negligible amount. The diode could also be integrated on
221:
The input current which drives the transistor's base sees two paths: one path into the base and the other path through the
Schottky diode and into the collector. When the transistor conducts, there will be about 0.6 V across its base–emitter junction. Typically, the collector voltage will be
217:
When forward-biased, a
Schottky diode's voltage drop 0.25 V is much less than a standard silicon diode's 0.6 V. In a standard saturated transistor, the base-to-collector voltage is 0.6 V. In a Schottky transistor, the Schottky diode shunts current from the base into the collector
184:
switches. A saturated transistor is turned on hard, which means that it has a lot more base drive than it needs for the collector current it is drawing. The extra base drive creates a stored charge in the base of the transistor. The stored charge causes problems when the transistor needs to be
196:
Storage time can be eliminated and propagation delay can be reduced by keeping the switching transistors from saturating. Schottky transistors prevent saturation and the stored base charge. A Schottky transistor places a
Schottky diode between the base and collector of the transistor. As the
252:. One of those clamp circuits used a single germanium diode to clamp a silicon transistor in a circuit configuration that is the same as the Schottky transistor. The circuit relied on the germanium diode having a lower forward voltage drop than a silicon diode would have.
240:(roughly 0.6 V) minus the Schottky diode's forward voltage drop (roughly 0.2 V). Consequently, the excess input current is shunted away from the base, and the transistor never goes into saturation.
201:.) The resulting transistors, which do not saturate, are Schottky transistors. The Schottky TTL logic families (such as S and LS) use Schottky transistors in critical places.
197:
transistor comes close to saturating, the
Schottky diode conducts and shunts any excess base drive to the collector. (This saturation avoidance technique is used in the 1956
344:, Biard, James R., "Unitary Semiconductor High Speed Switching Device Utilizing a Barrier Diode", published December 31, 1964, issued August 26, 1969
42:
319:
248:
In 1956, Richard Baker described some discrete diode clamp circuits to keep transistors from saturating. The circuits are now known as
108:
89:
177:
61:
268:
46:
209:
68:
170:
75:
35:
379:
57:
363:
141:
that prevents the transistor from saturating by diverting the excessive input current. It is also called a
341:
271:
with
Schottky diodes. Later, it was included in the 74LS, 74AS, 74ALS, 74F TTL logic families too.
181:
82:
327:
264:
186:
280:
161:
153:
121:
256:
166:
138:
373:
190:
249:
198:
24:
134:
302:
Integrated
Circuits and Semiconductor Devices: Theory and Application
364:
Schottky-Barrier Diode
Doubles the Speed of TTL Memory & Logic
208:
18:
49:. Unsourced material may be challenged and removed.
16:Device that prevents a transistor from saturating
300:Deboo, Gordon J.; Burrous, Clifford No (1971),
8:
218:before the transistor goes into saturation.
313:
311:
109:Learn how and when to remove this message
231:) is less than the base–emitter voltage
160:
152:
120:
320:"Maximum Efficiency Switching Circuits"
292:
165:Effective internal circuit composed of
7:
324:MIT Lincoln Laboratory Report TR-110
47:adding citations to reliable sources
213:Operation of a Schottky transistor
14:
23:
34:needs additional citations for
1:
178:transistor–transistor logic
171:bipolar junction transistor
143:Schottky-clamped transistor
396:
180:(TTL) uses transistors as
214:
173:
158:
133:is a combination of a
126:
366:- computerhistory.org
330:on September 25, 2015
318:Baker, R. H. (1956),
212:
164:
156:
124:
58:"Schottky transistor"
269:74S TTL logic family
189:in the original TTL
43:improve this article
131:Schottky transistor
215:
174:
159:
127:
265:Texas Instruments
187:propagation delay
119:
118:
111:
93:
387:
380:Transistor types
351:
350:
349:
345:
338:
332:
331:
326:, archived from
315:
306:
305:
297:
281:Schottky barrier
239:
230:
125:Device structure
114:
107:
103:
100:
94:
92:
51:
27:
19:
395:
394:
390:
389:
388:
386:
385:
384:
370:
369:
360:
355:
354:
347:
340:
339:
335:
317:
316:
309:
299:
298:
294:
289:
277:
267:introduced the
246:
238:
232:
229:
223:
207:
151:
115:
104:
98:
95:
52:
50:
40:
28:
17:
12:
11:
5:
393:
391:
383:
382:
372:
371:
368:
367:
359:
358:External links
356:
353:
352:
333:
307:
291:
290:
288:
285:
284:
283:
276:
273:
257:James R. Biard
245:
242:
236:
227:
206:
203:
167:Schottky diode
150:
147:
139:Schottky diode
117:
116:
31:
29:
22:
15:
13:
10:
9:
6:
4:
3:
2:
392:
381:
378:
377:
375:
365:
362:
361:
357:
343:
337:
334:
329:
325:
321:
314:
312:
308:
304:, McGraw-Hill
303:
296:
293:
286:
282:
279:
278:
274:
272:
270:
266:
261:
258:
253:
251:
243:
241:
235:
226:
219:
211:
204:
202:
200:
194:
192:
188:
183:
179:
172:
168:
163:
155:
148:
146:
144:
140:
136:
132:
123:
113:
110:
102:
91:
88:
84:
81:
77:
74:
70:
67:
63:
60: –
59:
55:
54:Find sources:
48:
44:
38:
37:
32:This article
30:
26:
21:
20:
336:
328:the original
323:
301:
295:
262:
254:
250:Baker clamps
247:
233:
224:
220:
216:
195:
191:logic family
175:
142:
130:
128:
105:
96:
86:
79:
72:
65:
53:
41:Please help
36:verification
33:
199:Baker clamp
342:US 3463975
287:References
135:transistor
99:April 2011
69:newspapers
263:In 1971,
255:In 1964,
205:Operation
182:saturated
176:Standard
149:Mechanism
374:Category
275:See also
244:History
228:CE(sat)
83:scholar
348:
157:Symbol
137:and a
85:
78:
71:
64:
56:
90:JSTOR
76:books
169:and
62:news
45:by
376::
322:,
310:^
237:BE
193:.
145:.
129:A
234:V
225:V
112:)
106:(
101:)
97:(
87:·
80:·
73:·
66:·
39:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.